产品
文章
搜索
首页 >> NDT仪器 >> 探伤仪 >> 粘接检测 >> 35RDC
35RDC
    发布时间: 2019-05-23 00:00    

35RDC是一款简单的Go/No-Go（通过/未通过）超声检测仪，用于探测航天器材复合结构因受到撞击而在近表面处形成的缺陷。带有背光液晶显示屏，在近表面处未发现损伤时会显示GOOD字样，在探测到近表面处的缺陷时会显示BAD字样。

35RDC

35RDC Composite Damage Checker
The handheld 35RDC is a simple Go/No-Go ultrasonic instrument designed to detect subsurface defects caused by impact damage on solid laminate aircraft composite structures. The 35RDC features a backlit LCD that displays the word GOOD if no subsurface damage is found or the word BAD when it detects subsurface damage. It uses an ultrasonic transducer that can be placed or scanned on the area of composite material suspected of having impact damage. Weighing only 0.24 Kg (8.5 oz.) and featuring a simplified keypad, this rugged ultrasonic instrument is easy to operate and requires minimal training.

Features
For use on solid laminate structure aerospace composites
Simple one-button calibration
Thickness range 0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)
Simple Good/Bad/Beyond Cal display readout
Back light matrix display with user help text
AA battery operation
Handheld, weighing only 0.24 Kg (8.5 oz.)
Energy saving Auto Power off feature
Long battery life, 150 hours typical
Battery life indicator


General Environmental IP65 compliant Splash-proof, impact-resistant case. Sealed, color-coded keypad
Operating Temperature Range -10° C to +50° C (+14° F to 122° F)
Size: (W x L x H) 84 mm x 152 mm x 84 mm (3.31 in. x 6.0 in. x 1.50 in.)
Weight 0.24 kg (8.5 oz)
Standard Inclusions Wrist strap, 3 AA batteries, 5 MHz transducer, transducer cable, couplant, carrying case, rubber protective boot with neck strap, instruction manual, two-year limited warranty
Display Modes
  • Digital Readout Good, Bad or Beyond CAL thickness
  • Advanced user setting shows A-scan or waveform. For use by qualified NDT personnel only.
Thickness Measurement Range** 0.63 mm to 22.8 mm (0.025 in. to 0.900 in.) 
** Thickness range depends on material, transducer, and surface conditions.
Material Velocity Fixed velocity for carbon fiber aerospace composite
Transducer Frequency 5.0 MHz
Measurement Update Rate 20 Hz
Deviation alarm set points Programmable +/- from calibration point. Set in advance setup
Power Supply Battery 3 AA alkaline or NiMH batteries
Operating Time 150 hours typical battery life; 30 hours continuous with backlight on
Low Battery Indicator Continuously indicates battery status
Battery Saver Auto Power Off/Continuous On
AC Power Supply Optional

Optional Accessories

USB/ADP-115: AC-115 power supply 
USB/ADP-230: AC-230 power supply

*All specifications are subject to change without notice.