产品
文章
搜索
首页 >> NDT仪器 >> 探头 >> 相控阵探头 >> 用于角度声束探头的楔块
用于角度声束探头的楔块
    发布时间: 2019-05-22 00:00    

用于角度声束探头的楔块有可在钢中生成0°、45°、55°、60°标准的折射角度的型号，可进行从30°到70°范围内的横波或纵波角度声束检测。这些楔块带有不锈钢螺钉孔，可将楔块牢固地安装在探头上。 可订购的IHC楔块可以提高检测质量：灌溉，楔块架上的安装孔可用于连接Olympus的扫查器，硬质合金条可提高防磨效果。

用于角度声束探头的楔块

Advantages

  • Available in standard refracted angles of 0°, 45°, 55°, and 60° in steel for angle-beam inspections from 30° to 70°, SW or LW
  • Stainless steel screw receptacles provide a firm anchoring of probes to wedges.
  • Lateral electronic scanning replaces the hand-skewing movement (with lateral wedges).
  • The IHC wedge option can be ordered to improve the quality of the inspection: irrigation, mounting holes for the wedge holder to work with any Olympus scanner, and carbide pins to increase wear resistance.
  • Wedges are designed to perform manual or automated scans.
  • Custom wedges with specific refracted angles can be ordered; wedge shape and contour can also be customized.

Part Number Probe Type Nominal Refracted Beam Angle 
(in Steel) 		Recommended Sweep (°) Probe Orientation Wedge Dimensions (mm)
L W W* H
SA00-0L A00 0° LW −30 to 30 Normal 16 12 N/A 12
SA00-N60S A00 60° SW 45 to 70 Normal 21 14 N/A 13
SA0-0L A0 0° LW −30 to 30 Normal 23 12 N/A 11
SA0-N60S A0 60° SW 45 to 70 Normal 32 18 N/A 21
SA1-0L A1 0° LW −30 to 30 Normal 29 30 10 20
SA1-N60S A1 60° SW 30 to 70 Normal 30 30 40 16
SA1-N60L A1 60° LW 45 to 70 Normal 28 30 40 21
SA2-0L A2 0° LW −30 to 30 Normal 65 30 40 20
SA2-N60L A2 60° LW 30 to 70 Normal 79 30 40 50
SA2-N55S A2 55° SW 30 to 70 Normal 69 30 40 43
SA3-0L A3 0° LW −30 to 30 Normal 38 37 50 20
SA3-N45S A3 45° SW 30 to 60 Normal 55 37 50 30
SA3-N45L A3 45° LW 30 to 60 Normal 55 37 50 49
SA3-N60S A3 60° SW 45 to 70 Normal 58 37 50 32
SA3-N60L A3 60° LW 45 to 70 Normal 53 37 50 40
SA4-0L A4 0° LW −30 to 30 Normal 59 47 55 20
SA4-N45S A4 45° SW 30 to 60 Normal 90 47 55 51
SA4-N45L A4 45° LW 30 to 60 Normal 88 47 55 85
SA4-N60S A4 60° SW 45 to 70 Normal 86 47 55 45
SA4-N60L A4 60° LW 45 to 70 Normal 83 47 55 68
SA5-0L A5 0° LW −30 to 30 Normal 38 45 55 20
SA5-N45S A5 45° SW 30 to 60 Normal 57 47 55 37
SA5-N60S A5 60° SW 45 to 70 Normal 46 43 55 25
SA5-N60L A5 60° LW 45 to 70 Normal 39 50 55 41
SA10-0L A10 0° LW −30 to 30 Normal 25 23 40 20
SA10-N55S A10 55° SW 30 to 70 Normal 23 23 40 14
SA10-N60L A10 60° LW 30 to 70 Normal 26 23 40 30
SA11-0L A11 0° LW −30 to 30 Normal 35 23 40 23
SA11-N55S A11 55° SW 30 to 70 Normal 41 23 40 29
SA11-N60L A11 60° LW 30 to 70 Normal 43 23 40 53
SA12-0L A12 0° LW −30 to 30 Normal 62 23 40 20
SA12-N55S A12 55° SW 30 to 70 Normal 73 23 40 45
SA12-N60L A12 60° LW 30 to 70 Normal 61 23 40 53
SA14-0L A14 0° LW −30 to 30 Normal 80 23 40 20
SA14-N55S A14 55° SW 30 to 70 Normal 96 23 40 49
SA15-N60S A15 60° LW 35 to 70 Normal 18 22 N/A 12
SA16-N55S A16 55° SW 40 to 70 Normal 85 31 40 44
SA31-0L A31 0° LW -30 to 30 Normal 40 30 40 20
SA31-N55S A31 55° SW 40 to 70 Normal 49 30 40 32
SA31-N60L A31 60° LW 40 to 70 Normal 39 30 40 31
SA32-0L A32 0° LW -30 to 30 Normal 50 30 40 20
SA32-N55S A32 55° SW 40 to 70 Normal 62 30 40 33
SA32-N60L A32 60° LW 40 to 70 Normal 56 30 40 43
SAWS1-N60S AWS1 60° SW 45 to 70 Normal 45 38 N/A 32
SAWS1-0L AWS1 0° LW -30 to 30 Normal 38 38 N/A 40
SNW1-0L NW1 0° LW N/A Normal 66 32 32 22
SNW1-0L-AQ25 NW1 0° LW N/A Normal 71 40 40 37
SNW1-0L-AQ25-WR NW1 0° LW N/A Normal 93 40 40 39
SNW1-0L-IHC-C NW1 0° LW N/A Normal 66 32 32 22
SNW2-0L NW2 0° LW N/A Normal 26 32 32 22
SNW2-0L-AQ25 NW1 0° LW N/A Normal 31 40 40 37
SNW2-0L-AQ25-WR NW1 0° LW N/A Normal 53 40 40 39
SNW3-0L NW3 0° LW N/A Normal 130 32 32 22
SNW3-0L-AQ25 NW1 0° LW N/A Normal 135 40 40 37
SNW3-0L-AQ25-WR NW1 0° LW N/A Normal 157 40 40 39
SPWZ1-0L PWZ1 0° LW -30 to 30 Normal 75 30 40 20
SPWZ1-N55S PWZ1 55° SW 40 to 70 Normal 87 30 40 45
SPWZ3-0L PWZ3 0° LW -30 to 30 Normal 40 30 40 20
SPWZ3-N55S PWZ3 55° SW 30 to 70 Normal 65 30 40 38
SPWZ3-N60L PWZ3 60° LW 45 to 70 Normal 64 30 40 35
* Width with IHC wedge option

External Pipe Diameter 
in. 		Curvature Range
Minimum 
mm (in.) 		Maximum 
mm (in.)
Wedge Type: SA1, SA2, SA3, SA4, SA5, SPWZ1, SPWZ3, SI1, SI2, SI3
2 45.7 (1.8) 50.8 (2)
2.25 50.8 (2) 57.1 (2.25)
2.5 57.1 (2.25) 63.5 (2.5)
3 63.5 (2.5) 76.2 (3)
3.25 76.2 (3) 82.5 (3.25)
3.5 82.5 (3.25) 88.9 (3.5)
4 88.9 (3.5) 101.6 (4)
4.5 101.6 (4) 114.3 (4.5)
5 114.3 (4.5) 127.0 (5)
6 127.0 (5) 152.4 (6)
7 152.4 (6) 177.8 (7)
8 177.8 (7) 203.2 (8)
10 203.2 (8) 254.0 (10)
12 254.0 (10) 304.8 (12)
16 304.8 (12) 406.4 (16)
22 406.4 (16) 555.8 (22)
30 558.8 (22) 762.0 (30)
Flat 762.0 (30) up to flat
Wedge Type: SA10*, SA11*, SA12*, SA14*, SA31, SA32
2.375 50.8 (2) 60.3 (2.375)
2.875 60.3 (2.375) 73.0 (2.875)
3.5 73.0 (2.875) 88.9 (3.5)
4 88.9 (3.5) 101.6 (4)
4.5 101.6 (4) 114.3 (4.5)
5.563 114.3 (4.5) 141.3 (5.563)
6.625 141.3 (5.563) 168.3 (6.625)
8.625 168.3 (6.625) 219.0 (8.625)
10.75 219.0 (8.625) 273.0 (10.75)
12.75 273.0 (10.75) 323.8 (12.75)
16 323.8 (12.75) 406.4 (16)
24 406.4 (16) 609.6 (24)
Flat 609.6 (24) up to flat
Wedge Type: ST and SPE
2 44.4 (1.75) 50.8 (2)
2.25 50.8 (2) 51.7 (2.25)
2.5 57.1 (2.25) 63.5 (2.5)
3 63.5 (2.5) 76.2 (3)
3.5 76.2 (3) 88.9 (3.5)
4 88.9 (3.5) 101.6 (4)
5 101.6 (4) 127.0 (5)
6 127.0 (5) 152.4 (6)
8 152.4 (6) 203.2 (8)
12 203.2 (8) 304.8 (12)
16 304.8 (12) 406.4 (16)
22 406.4 (16) 558.8 (22)
Flat 555.8 (22) up to flat
* Below 4 in., IHC are integrated in the Rexolite and wedges are not compatible with IHC rings. Flat wedge can be used for pipes greater than 12.75 in. OD.